ASTM B704 Alloy 825 Cold Drawn Welded Coiled Tubing 1/4 inch

ASTM B704 Alloy 825 Cold Drawn Welded Coiled Tubing 1/4 inch

Specifications

Company and Factory Introduction

MTSCO provides stainless steel and nickel alloy product solutions for global industrial piping projects, serving industries such as oil and gas, chemicals, marine, and heat exchange equipment. For control line products, MTSCO established its own factory, Siri Tubing, in 2024, specializing in the production of welded coiled tubing, capillary tubing, control line tubing, and multi-core cables, all of which are ISO-certified. Leveraging our in-house manufacturing capabilities, MTSCO ensures more consistent quality control, reliable delivery coordination, and robust project support. We do more than just sell products—we are your trusted supply chain partner.

Factory Advantages

1. Ultra-Long Continuous Manufacturing:Siri Tubing provides continuous coiled tubing up to 15,000 meters without butt welds (OD: 3.18-38.1mm, WT: 0.4-2.54mm). This eliminates on-site welding risks and reduces costs for deep-sea umbilicals and downhole cabling.

2. Rigorous Quality Control & Traceability: Raw materials are 100% sourced from top mills like POSCO, JISCO, and TSINGSHAN, undergoing secondary PMI and MTC verification. The entire production process is supervised and fully documented. We also support strict third-party inspections (SGS, TÜV, BV).

3. Ready Stock & Customization Services: To meet tight EPC project schedules, we maintain year-round stock of standard grades (304, 316, 2205, 2507, Alloy 625, Alloy 825). We also offer customized polymer encapsulation and highly secure packaging solutions, such as iron reels and solid wood spools.

4. Trusted by Global Energy Giants: As MTSCO’s manufacturing base, Siri Tubing is a stable supplier for top companies like OXY, KOC, and ADNOC. Driven by our S.I.R.I. philosophy (Safety, Ingenuity, Refinement, Innovation), our products have reliably served the oil & gas, geothermal, and shipbuilding sectors for over a decade.

Manufacturing Process Flow

The core manufacturing process for these welded coiled tubes typically includes strip welding, cold drawing, bright annealing, eddy current testing, and hydraulic/air tight testing, followed by precision coiling, marking, and final inspection as per project requirements. For small-diameter control line products, process stability directly impacts weld quality, dimensional consistency, and subsequent installation performance. MTSCO’s in-house facility, Siri Tubing, employs mature processes such as 100% laser welding, cold drawing, bright annealing, and plastic wrapping, making it suitable for the production of continuous-length control lines.

MTSCO Coiled Tubing Final Product Inspection Process

In high-pressure transport applications such as oil and gas, downhole operations, and deep-sea environments, the operational stability of coiled tubing is central to risk management. To this end, MTSCO has established a rigorous final product inspection system to ensure that coiled tubing meets quality standards.

First, the quality team verifies material composition through PMI testing to eliminate the risk of material mix-ups. Second, inspectors conduct rigorous dimensional and visual inspections to ensure the product’s physical specifications fully comply with engineering requirements. Given the continuous-length production process, technicians use Eddy Current Testing (ET) to identify deep-seated defects in the tubing. Subsequently, quality inspectors perform hydraulic/air tight tests to verify the product’s pressure integrity under simulated operating conditions. Finally, we test the product in the laboratory to ensure all performance specifications are met.

Hydraulic and Air Tight Test

To verify product reliability under extreme pressure, the production laboratory performs rigorous hydraulic test/air tight test on every coil of finished coiled tubing. Test engineers first seal both ends of the tubing and use a high-pressure pump system to inject water or high-purity nitrogen into the tubing, gradually increasing the internal pressure to multiples of the design standard. During the specified pressure stabilization period, high-precision sensors monitor the pressure curve in real time to confirm that the tubing exhibits no deformation or leakage when simulating deep-sea high-pressure or downhole conditions.

Siri Laboratory

·Weld Radiographic Test Laboratory (RT)

·Chemical Composition Analysis Laboratory

·Intergranular Corrosion Test Laboratory

·Tensile Test Laboratory

·Hardness Test Laboratory

·Metallographic Laboratory

Equipped with professional instruments such as tensile testers, impact testers, metallographic microscopes, and hardness testers, the Siri Laboratory performs mechanical property and non-destructive testing, including tensile, flaring, flattening, bending, hardness, and radiographic testing. All test reports and samples are archived as required to facilitate order traceability, quality verification, and project acceptance.

FAQ

Q1: What are the main materials used for MTSCO coiled tubing?

We offer a comprehensive range of stainless steel, duplex steel, and nickel alloy coiled tubing, including grades 304, 316, 2205, 2507, Alloy 625, and Alloy 825. All raw materials are sourced from internationally renowned steel mills, and each batch undergoes PMI material verification to ensure compliance with international standards such as ASTM and EN.

Q2: Do you accept third-party quality inspections?

A2: We fully support third-party inspections designated by our customers, such as SGS, TÜV, and BV.

Q3: What is the maximum operating pressure of the coiled tubing?

A3:Our welded coiled tubing undergoes standard hydraulic testing at 5,000 PSI and can withstand a maximum test pressure of 15,000 PSI, meeting the requirements of the vast majority of high-pressure applications.